The tools make cutting wood less complicated, faster and more precise. If they are used properly and with care, they can be a huge advantage when starting a new project with wood. There is a variety of saws that you can use to cut wood. Read this wood splitter advice and you will get to know a lot more. Wood splitter is one of the most common and versatile tools in the world of DIY and carpentry. Precisely because of this there is a world of possibilities and configurations: types of saw, powers, speeds or sizes are some variables that we must know in order to make a good choice when buying a tool of this type.
Once you read this wood splitter advice you will get facilitated as the work of cutting the wood and make the cuts more precise and accurate. Using them does not involve any effort, and the results are usually better than with the manual saw. In addition, there is a wide variety of chainsaws depending on what you want to do, so they can become very specialized and perform perfect jobs.
One tip – read this wood splitter advice
It is important to keep the saw in good condition: clean it, check the condition of the blade and the teeth, protect it when it is not used, etc. This tool is a great ally in the DIY days, so it is very necessary to take care of it!
Basic notions for wood splitter:
The objective of this tool is to make straight, fast and relatively precise cuts along a surface, normally boards, although it can also be used for masonry, tiles, plastics…
The basic components that we must know to choose the best wood splitter are:
Control of depth: Not all the wooden boards that we cut have the same thickness, so it is necessary to be able to regulate the depth of the cut by regulating the height of the saw.
Tilt adjustment: It allows adjusting the inclination of the saw with respect to the board to make cuts in different angles of 90º.
Saw protector: It is a metal case that covers the saw when it is not in use and contracts when we are making a cut.
Plate or base: It is a piece of metal, with a flat surface, which rests on the board when cutting with the hand wood splitter and allows the cut to be completely straight.
Saw blade: It consists of a circular sheet that can have different sizes and be made with different materials depending on the use that is going to be given.
Wood splitter with a battery or cable:
This decision is conditioned to a large extent by the place where the tool will be used. If we are going to be in a place where it is difficult to access the electricity network, we will opt for a battery, but the decision is usually not so easy.
Read this wood splitter advice -compare features or capabilities
The more watts (W) better, more precise cuts and harder materials.
Saw blade capacity:
The higher the saw, the greater the depth of cut, but on the other hand, the smaller the lighter saw, the easier it will be to control.
Having this capacity allows that after pressing the button the saw stops in 2 or 3 seconds, while otherwise, it can take up to 10 times more.
Circular sheet anchor:
There are different methods to fix the blade of the saw, some faster than others.
Cutting angle capacity:
Depending on the use that we are going to give the tool we may be interested in having the possibility of making cuts at more pronounced angles.
In order to make the straightest cuts possible, we can find saws that only have one mark on the base and others that even have the laser that is projected on the wood.
- Saw blades:
Once we have opted for the mountain to choose the sheet, an equally important decision, perhaps more. There are many types, these are the most common:
Steel sheets: They are the most economical and are used mostly in softwoods. They wear quickly on other materials and hardwoods.
Speed steel: Similar to the previous ones but with greater resistance. Its use in hard materials is still not recommended.
Carbon: Carbon is added to the tips of the saw allowing greater strength and precision. Its use is recommended in addition to softwoods, agglomerates and some metals such as aluminum and copper.
Polycrystalline diamond (PCD): In this case, the sheet has a great resistance and can be used practically on any material.
What brands usually offer good products?
The brands are continuously taking out new models, all with different features. Therefore make a classification in which to establish which is the best hand wood splitter can be a task that is quickly obsolete. Therefore it is preferable to consult brands that we know make good products, and with the information, we provide here make the best choice for us.